LIINI® Home 230 V Bottle Warmer: User Manual

Important information about the safety of your LIINI® product.

Sogar i dirä Schproch zum abelade. Don’t understand? Yes, Swiss German sometimes sounds a bit odd. That’s exactly why we have made the safety, use and cleaning instructions available to download in your language.

GPSR

• Safety testing: All our products are regularly tested to ensure that they pose no risk to health or safety.
• Transparent documentation: We make sure that all important information about the safe use of our products is clear and easy to understand.
• Traceability: Every product carries information about the manufacturer, importer or distributor to enable seamless tracing.

You can also find all relevant safety documents as well as use and cleaning instructions collected on the GPSR page.

All the technical details about the bottle warmer for use at home.

Dimensions / temperature levels / power supply

Certifications

LIINI® Home has all the important approvals and meets the high safety and health standards of the EU and Switzerland.

• CE certified: Our bottle warmer is, of course, CE certified and complies with the regulations that apply in the EU and Switzerland.
• RoHS certified: LIINI® Home has been thoroughly tested for harmful substances and meets the applicable maximum limits for hazardous substances.

Just a few more steps until LIINI® Home makes your everyday life at home as a mum or dad easier.

Check the scope of delivery

Congratulations on your purchase of your bottle warmer. All bottle warmers come in sealed packaging because they are a hygiene product. We attach great importance to hygiene standards, so please check immediately after receiving your parcel that the packaging seals have not been broken. The scope of delivery includes:

• LIINI® Home bottle warmer in the colour of your choice
• The bottle adapters are not included in the scope of delivery and must be purchased separately

Lid with screw cap

LIINI® Home has a practical plastic lid with a screw cap.

We recommend closing the device with the lid when it is not in use. This keeps LIINI® Home optimally protected from dust and other dirt.

Cleaning before first use

Before first use, we recommend thoroughly cleaning the heating area. To do this, you can remove the inserted sealing ring with your fingers.

In the next step, you can clean and disinfect the heating plate and the sealing ring. We recommend our LIINI® cleaning and disinfecting wipes, which eliminate up to 99.9 % of all viruses and bacteria.

You can find replacement seals in our shop:

Built-in indicator light

LIINI® Home has a built-in indicator light for a simple status display.

If the indicator light is red, the device is correctly connected to the mains and ready for use. During the warming process, the indicator light turns white to show that the bottle is being actively warmed.

Preparing the baby bottle at home, explained step by step with pictures.

1. 1

   Step 1: Open the lid with the screw cap

   The hard plastic lid reliably protects the heating area of LIINI® Home from dust and dirt.

   If needed, the lid can easily be removed and put safely to one side while the device is in use.

   

2. 2

   Step 2: Disinfect the heating plate

   Before every use, the stainless-steel heating plate should be cleaned with a disinfecting wipe for babies. We recommend our LIINI® cleaning and disinfecting wipes.

   You can leave the residual liquid from the wipe to work for 60 seconds and then wipe away the residue with a dry cloth.

   Caution

   Do not touch the housing

   When disinfecting, take care not to touch the plastic housing of LIINI® – this could cause discolouration.

   

3. 3

   Step 3: Check the sealing ring on the heating plate

   Before every use, check that the sealing ring on the heating plate is correctly fitted.

   The sealing ring must be inserted as shown in the illustration: the two sealing lips must always be visible and must not point downwards.

   The sealing ring is a wearing part – you can find a suitable replacement in our shop:

   Order a replacement seal

   

4. 4

   Step 4: Check the sealing ring in the adapter

   If your baby bottle does not need an adapter, please continue with step 6.

   All adapters have an additional sealing ring that ensures a tight connection between the baby bottle and the adapter.

   During use, make sure that the sealing ring of the heating plate is not mixed up or swapped with the sealing ring of an adapter.

   The device is only completely leak-proof if both the sealing ring of the heating plate and the sealing ring of the adapter in use are correctly fitted.

   

5. 5

   Step 5: Screw on the adapter

   An adapter is required when using the following baby bottles:

   • Babylove by dm (wide-neck bottle)
   • Babylove by dm (narrow bottle neck)
   • Bibs
   • Dr. Brown’s (narrow bottle neck)
   • Lansinoh
   • MAM
   • NIP Cherry Green
   • Medela
   • NIP (narrow bottle neck)
   • NUK First Choice
   • NUK Nature Sense
   • NUK Perfect Match
   • Tommee Tippee
   • Twistshake (plastic bottles)

   Screw the adapter hand-tight onto the bottle warmer.

   

6. 6

   Step 6: Add breast milk / water

   For breast milk: Pour the desired amount of breast milk directly into the baby bottle.

   For milk powder / breast milk substitutes: When using powder products, the mineral water from the bottle (or boiled tap water) must now be poured into the baby bottle in the desired amount. The milk powder is not added yet.

   

7. 7

   Step 7: Screw the baby bottle onto LIINI® Home

   Hold LIINI® Home in your hand with the heating plate facing down. Place the baby bottle onto the thread from below and turn the bottle clockwise until it is screwed hand-tight onto LIINI® Home.

   Note

   Turn only the bottle

   Turn only the baby bottle. LIINI® Home itself should not be turned while screwing.

   We can guarantee that the bottle warmer is 100 % leak-proof. If liquid leaks out, check that the sealing ring on the heating plate (step 3) and the one in the adapter (step 4) are fitted correctly.

   If both sealing rings are in place and liquid still leaks out, also check both sealing rings for cracks.

   

8. 8

   Step 8: Start LIINI® Home

   The bottle warmer has a built-in child lock.

   Before switching on, make sure the device is connected to the mains. If the indicator light is red, LIINI® Home is in standby mode and ready for use.

   To switch on, touch the power icon for 3 seconds and keep your finger on the symbol. A gentle touch is enough – the icon does not need to be pressed.

   Once the device has been unlocked successfully, the two symbols for breast milk and pre formula flash in the upper part of the display.

   Automatic switch-off:
   If the device is switched on but no mode is selected within 30 seconds, it switches off automatically. This prevents unnecessary energy consumption.

   

9. 9

   Step 9: Choose breast milk or pre formula mode

   Once the device is unlocked, you can select the warming mode you want.

   To do this, touch the temperature icon area once to switch between the two modes:

   • Pre formula icon: warming programme for pre formula or infant formula powder
   • Breast milk icon: gentle warming programme for breast milk

   The symbol that is flashing shows the mode currently selected.

   In breast milk mode, LIINI® Home warms the milk particularly gently with reduced heating power. This supports warming that is as even as possible and protects valuable nutrients and delicate components of the breast milk as well as possible.

   In pre formula mode, the bottle is warmed with higher heating power to shorten the warming time.

   Once you have chosen the setting you want, confirm your selection by touching the power icon once.

   

10. 10

    Step 10: Choose the drinking temperature you want

    Now select the drinking temperature you want. LIINI® Home offers you four temperature levels:

    37 °C / 40 °C / 45 °C / 50 °C

    Confirm your selection by briefly touching the power icon.

    LIINI® Home then automatically starts the warming process, warms the bottle to the selected temperature and then reliably keeps it warm.

    For breast milk, we recommend only the 37 °C setting so that the milk is warmed particularly gently.

    For pre formula or infant formula powder, the right temperature depends on the instructions of the powder manufacturer concerned.

    

11. 11

    Step 11: Add the milk powder

    If you use LIINI with breast milk, you can skip this step.

    You can now separate the baby bottle from the bottle warmer and add the milk powder.

    Mixing the powder with the water works best with circular movements. Avoid shaking it vigorously, as this can cause tummy ache in your baby.

    

12. 12

    Step 12: Bon appétit!

    Now you can screw the teat onto your baby bottle.

    The baby bottle is now ready for your hungry baby.

    The LIINI® team wishes you bon appétit! 🙂

    

For the longevity of the device and the safety of you and your children!

How to clean the device properly

Improper handling can pose serious risks. Please therefore follow the instructions below carefully to avoid hazards:

• Cleaning the heating area: Use only special cleaning wipes for baby products (available from specialist retailers) to clean the heating area. We recommend our LIINI® cleaning and disinfecting wipes.
• Cleaning the housing: Wiping the housing of the bottle warmer with a slightly damp cloth is entirely sufficient. For stubborn dirt, you may also use a little washing-up liquid. Make sure that no water can get inside the device. The electrical components are particularly sensitive to moisture.
• Regular checks: Check your device regularly for signs of damage or corrosion. If you notice anything unusual, or if water has accidentally got into the device, stop using it and contact our customer service immediately.

Everything about the different baby bottles on the market.

No baby bottle adapter needed

For the following baby bottles, no adapter is needed:

• LIINI® double-glass baby bottle 120 ml
• LIINI® double-glass baby bottle 220 ml
• Philips AVENT
• Elodie
• Chicco Perfect 5
• Chicco Original Touch
• Pigeon (wide-neck bottle)
• Dodie
• Combi
• Spectra
• Richell

A baby bottle adapter is needed

For all other baby bottles, an adapter is needed to use LIINI® Home and prepare the bottle.

Click on your baby bottle brand below to go straight to the right adapter in our shop.

• Babylove by dm (wide-neck bottle)
• Babylove by dm (narrow bottle neck)
• Bibs
• Dr. Brown’s (narrow bottle neck)
• Lansinoh
• MAM
• NIP Cherry Green
• Medela
• NIP (narrow bottle neck)
• NUK First Choice
• NUK Nature Sense
• NUK Perfect Match
• Tommee Tippee
• Twistshake (plastic bottles)

Important to note in order to prevent leaks.

Adapters have a separate seal!

All adapters have a separate seal, which sits in the adapter itself and prevents liquid from leaking at the connection between the baby bottle and the adapter.

You can find replacement seals for the respective adapters in our shop:

Heating plate seal: installation direction

For LIINI® Home to be 100 % leak-proof during warming and not lose any liquid, the correct installation direction of the sealing ring on the heating plate is important.

The correct way to fit the sealing ring is shown in the illustration.

The sealing ring for the heating plate is a wearing part that must be replaced regularly.

Ready to drink quickly.

Reference values

The time it takes to reach the desired drinking temperature depends on various factors:

• Ambient temperature (winter / summer)
• Drinking temperature (37 °C – 50 °C)
• Starting temperature (fridge)
• Bottle size
• Bottle material (plastic / glass)

For this reason, we cannot give you any binding warming times.

Trust is good – checking is better.

Tolerances in warming temperatures

The different temperature levels of LIINI® Home are checked with calibrated temperature measuring devices and adjusted accordingly. Because of the following variables, tolerances of up to +/- 2.5 °C can occur in the warming temperature:

• Bottle material, e.g. glass or plastic
• Ambient temperature
• Starting temperature of the liquid
• Water hardness or limescale deposits
• Consistency of the breast milk
• Accuracy of the measuring device used

Please also follow the instructions of the manufacturer of your measuring device.

Checking the temperature: how to do it right

To create test conditions that are as comparable as possible, we recommend checking the temperature as follows:

1. Measure immediately after the beep.
2. The temperature may only be taken in the middle of the baby bottle.
3. Under no circumstances should meat thermometers or other cheap measuring devices be used to verify the temperature. These devices are not suitable for measuring liquids!
4. We recommend a digital clinical thermometer for the measurement.
5. Tolerances of up to 2.5 °C are unavoidable and do not constitute a product defect.

Guideline values for your baby’s food intake.

Regular weighing is important

The amount of milk for your baby depends on its weight – that is why your baby needs to be weighed regularly.

Doctors recommend 6–8 meals within 24 hours.

Example: At a weight of 4200 g, this gives a daily requirement of 700 ml:

• 115 ml per bottle for 6 meals
• 90 ml per bottle for 8 meals

LIINI® stands for quality.

The products carry a warranty of 24 months in total from receipt of the order. Wearing parts are completely excluded from the warranty.

Wearing parts are:

• Seals (sealing ring of the heating plate and sealing rings of the adapters)

The warranty is also excluded:

• If the defect is due to improper handling or use of the product that does not correspond to normal use.
• If the defect is due to a malfunction caused by incorrect operation that does not correspond to the instructions described in the relevant user manual.
• If the defect is due to external interference (“third-party intervention”), in particular repairs and interventions by persons who have not been authorised to do so by LIINI AG.
• If the product has been damaged by contact with water / water damage.
• Normal signs of wear and tear do not give rise to a warranty claim.

LIINI AG may fulfil the warranty either by partial replacement (e.g. spare parts such as seals) or by complete replacement with an equivalent product.

To check a warranty claim, the customer must open a ticket in the “Problem with device / defect” category of the ticket system at www.LIINI.ch/support and provide the following evidence:

• Video showing the problem
• Picture 1: front of the device
• Picture 2: back of the device
• Picture 3: underside of the device
• Picture 4: heating plate of the device

If LIINI AG finds corresponding damage to the device (e.g. a misshapen heating plate, atypical scratches or dents, etc.), any warranty is excluded.

By submitting the ticket, the customer confirms that all information is truthful. Should it emerge during the processing of the warranty case that warranty fraud has taken place, LIINI AG reserves the right to take appropriate legal action.

According to the Product Safety Act (ProdSG).

Manufacturer identification & contact address

Responsible for the import and distribution of all products:

EU authorised representative

Exclusively for contact by authorities.